The issue of heating garages and utility rooms is relevant in the winter conditions of the northern regions. Demand creates supply, because the number of heating devices on the market is very large.
To choose the right heaters for the garage, you need to understand the principle of their action, to evaluate the cost-effectiveness, safety and the ability to solve the problem.
We have prepared an overview of the most popular solutions, outlined the pros and cons of different models, and also listed the basic rules for their operation. A step-by-step calculation of the heater's power will help you choose the optimal heating device for the garage.
Types of heaters and their features
The principle of operation of an ordinary heater itself is to transfer heat to the air near it. Such devices, typical for use in garages, for a long time were electric stoves, gas stoves or stove stoves. These are devices and devices of the so-called direct heating.
Now you can buy heaters that surpass these devices in efficiency, simplicity and safety of use.
Let's consider in more detail the types of heaters that can be used in the garage.
Option 1. Oil heaters
A typical representative of ordinary heaters is an electric oil cooler.
Simplified oil heater can be represented as a sealed container filled with mineral oil. A heater is installed inside the container body, which heats the oil. When heated, the heater transmits energy to the oil, it is the body, which distributes heat in the ambient air
The device does not require special installation, has a very simple design, rarely breaks and you can do without special solutions to meet safety requirements.
An advantageous difference of an oil radiator compared to an ordinary electric stove is a larger heating surface area and, as a result, a significantly greater heat transfer.
Oil radiators have long been used in heating rooms for various purposes, so there is a wide selection of options when buying. It will not be difficult to choose a device of suitable power.
The electronic panel of the oil heater with the ability to turn on the device at a specified time allows you to come already in a heated garage
First of all, for use in the garage, you must have a rheostat that controls the temperature. When the room is warming up, you can turn on the radiator at full power, and to maintain the temperature - reduce to the values necessary for this.
The presence of automatic protection against overheating, as well as a sensor that fixes the slope of the device and disables it in the event of a rollover, will not interfere.
The presence of a thermostat that determines the outdoor temperature is not a priority for the garage. But equipping with a timer that allows you to turn on the device on schedule is a very convenient option if you need to warm up the garage in the morning.
Image Gallery
Photo from
Oil heater for garage
Moving an old home appliance
Heater for technical rooms
Homemade pipe heater
Advantages of oil garage heaters:
- cheap;
- rarely breaks;
- hard to damage on impact.
A significant plus of oil-filled appliances is the safety of use in a technical room in which combustible substances are stored and used. By accidentally hitting it, you can not be afraid that the case will crack, oil will spill and the rags, paper, etc. in the garage will ignite.
Among the shortcomings of oil devices, thermal inertia dominates: the radiator itself must heat up before it begins to give off heat. The second impressive minus is the uneven heating of the room.
Option # 2. Convective heating devices
The principle of operation of convective heaters (convectors) is based on the difference in air density at different temperatures. Cold air enters the device through the lower openings, heats up, becomes lighter and exits through the upper openings.
According to this simple principle, natural air circulation occurs with its heating inside the device. The access of cold air to the heating elements increases their heat transfer, compared to standard heaters.
The principle of operation of a convector heater is based on the natural circulation of the air mass and changes in its temperature and density
Convectors, as a rule, are mounted on walls, because it is necessary to provide space for incoming cold air from below and outgoing warm air from above. The upper holes are equipped with special guide louvers, the position of which determines the direction of movement of the outgoing warm air.
By the principle of heating, convective heating devices are divided into electric, gas and water varieties. Electric convectors are easier to install and operate than gas, but the power of the latter is higher.
A prerequisite for gas convective heaters is the installation of an exhaust hood for the influx of fresh air and the removal of combustion products. For small rooms, only gas convectors with a closed combustion chamber are used.
Advantages of convective garage heaters:
- the case of the device is not hot, so it is impossible to get a burn when touched;
- almost complete fire safety for electrical devices;
- lack of complex structural elements that may fail.
Convective heaters also have disadvantages. For example, an electrical device is more suitable for maintaining temperature than for quickly heating a room.
If operating in a garage, it will be necessary to regularly disassemble and clean the devices from dust.
A gas convective heater with a closed combustion chamber does not burn oxygen in a heated room. In addition, this is one of the most economical methods of heating.
Option # 3. Electric fan heaters and heat guns
According to statistics, the proportion of fan heaters is almost half of the sales of all heating devices designed for domestic purposes.
The fan heater also operates on the principle of convective action, only the replacement of warm air with cold air is forced using the built-in device. As a rule, this is an ordinary blade fan.
When choosing a fan heater, you need to pay attention to the type of heating element. Usually use a nichrome spiral, heater or ceramic plates.
Ceramic heating elements have a lower temperature, so dust or other particles burn in a smaller volume and produce less burning odors.
Blade fans come in two types: axial and tangential. The tangential type of fan is less noisy and is equipped with column heaters, which are installed vertically. Their cost is more expensive than ordinary horizontal fans.
A column electric heater can be equipped with an axial or low noise tangential fan
When using fan heaters for garages, the issue of the presence of a filter on the rear surface of the device is relevant. The filter must be.
It’s rare that a garage is kept clean, and the intense ingress of dust inside the appliance will quickly damage the heating element and fan. It will become clogged with dust quickly enough, so cleaning the filter should be simple, and replaceable cartridges should be cheap.
An electric heat gun is the same fan heater, only of high power (from 3 kW). When choosing such a serious device, it is necessary to take into account the rated voltage, because powerful heat guns are designed for 380 volts.
It is also necessary to correctly assess the ability of the wiring and sockets to withstand high power voltage. Quite often, they use the option of using a combination of a liquid fuel electricity generator complete with an electric gun.
If you have a gas or diesel generator, you can heat a non-electrified garage with electrical appliances
Advantages of electric garage heaters:
- are cheap;
- equally well able to both heat and maintain temperature;
- evenly distribute heat throughout the garage.
The disadvantage of using electric fan heaters in the arrangement of the garage is the need for effective protection against dust from entering the device. During operation, the device generates noise and stimulates the movement of air with a rise in dust harmful to it.
Option # 4. Diesel and gas heat guns
Heaters of this type are mainly used when it is necessary to quickly heat the room. The principle of operation of diesel and gas guns is similar to electric, only heating occurs due to the combustion of fuel or gas.
The fan of these guns also runs on electricity and, therefore, access to electricity is still necessary. The diesel heat gun is the most expensive, but also the most economical installation of all other types of heating.
There are two types of guns:
- direct heatingwhen, together with a stream of warm air, combustion products enter the room, which is unacceptable for small areas;
- indirect heatingwhen the combustion chamber is isolated from the heated air and the combustion products have a separate outlet.
A gas heat gun is also economical, however, combustion products enter the heated room. In addition, such a gun burns a lot of oxygen.
Therefore, from the standpoint of people's safety, it is very important to know what the main function of the room is: if people work in the garage, then it is better not to use a gas heater of this type.
The operation scheme of a diesel heat gun of indirect heating involves the removal of combustion products outside the heated room
Advantages of non-electric heat guns:
- equally well able to both heat and maintain temperature;
- evenly distribute heat throughout the garage;
- the use of diesel fuel and gas is much cheaper than electricity.
It is worth noting the disadvantages. By analogy with other types of heat guns, diesel and gasoline equipment burns oxygen. Creates noise during work, stimulates the movement of air, which raises dust in the garage.
Those wishing to purchase a diesel or gasoline heat gun for heating the garage must take responsible security measures. The risk of fire should be excluded and the room should be aired regularly. the device quickly burns oxygen
Option # 5. Infrared devices
Infrared (IR) heaters use the same operating principle as the Sun heats the Earth. Long waves of the radiation spectrum fall on objects and increase their temperature, and they already heat the air.
The designs of such devices may vary, but the main detail of infrared heaters is still the emitter.
For domestic purposes, heaters with a radiating surface temperature of up to 600 degrees Celsius are intended. In addition to electric infrared heaters, there are gas ones, but their use for poorly ventilated rooms is contraindicated.
Infrared heaters take up little space in the garage and their radiation can be directed to the car
The following types of emitters are used in modern electric infrared heaters:
- Metal. Low temperature stainless steel heater in combination with anode coated aluminum radiating plates. The simplest and most reliable heating design. Cracking occurs when heating and cooling.
- Ceramic. A metal spiral heats a ceramic panel coated with black glaze. Not too high efficiency.
- Mycothermal. The radiating wave plate is covered with mica. Very low surface temperature of the emitting panels - only 60 degrees. Relatively high cost with the previous two options.
- Quartz. A tungsten filament is enclosed in a quartz glass vacuum tube. Like all lamps, it requires careful handling.
- Halogen. The tube contains not vacuum, but inert gas. The temperature of the filament is higher than that of a quartz heater, but there is a noticeable glow.
- Carbon. The carbon thread is enclosed in a quartz glass vacuum tube. Higher efficiency than the previous two tube heaters, but also a higher cost.
Typically, infrared heaters with emitters based on aluminum plates are used for heating garages.
Firstly, they are cheaper. Secondly, they are very reliable and work for a long time. Well, the last - they are resistant to mechanical stress (shock), which is important for the conditions of the garage.
Inside the panel IR heater there are no complex technical devices and fragile elements. Many models are equipped with thermostats and temperature sensors. Floor options are usually equipped with rollover sensors (+)
The temperature of aluminum plates during heating, as a rule, does not exceed 300 degrees Celsius, which is lower than the ignition temperature of paper and wood. Therefore, the emitter itself meets the fire safety requirements.
At these temperatures, oxygen does not burn out, so the heater can work for a long time without harm to humans.
When choosing a heater with a radiator from the plates, you need to pay attention to the thickness of the anode layer. It is desirable that it be at least 25 microns. The housing of the heater must be stainless steel, then it will not rust when used in wet rooms.
Advantages of IR garage heaters:
- by the decision of the owner, we realize uniform heating of the garage or heating of a separate area, for example, a working area in a workshop garage;
- you can heat inaccessible for other devices garage places, for example, under the hood of a car.
The disadvantage of infrared heaters for the garage is that these devices are more suitable for maintaining temperature than for quickly warming the room.
Regarding infrared heaters, there are many speculations regarding their harm to the human body.
Image Gallery
Photo from
Advantages of IR heaters
Portable IR heater option
Area selection
An important factor of choice is nutrition
Gas infrared heater
Ceiling heating system
Option to place IR film on the wall
Option # 6. Heating cables
At first glance, the idea of organizing a warm floor for a garage may seem overly luxurious, but in one case it works very well. It is about solving the problem of starting a car in extreme cold.
It is possible to organize an electric heated floor only under the parking lot of the car and turn it on in winter during severe frosts. Since a warm floor does not emit a very large amount of heat, it is necessary to limit the heating zone.
In this case, you need to throw a cover on the car so that it reaches the garage floor from all sides. Then the heating zone will be limited by the space under the machine and the machine itself.
There will be no air movement between the heating zone and the rest of the garage space, and heat loss through the cover with a temperature difference of not more than 20 degrees will be negligible.
Using this method for a car, it is possible to achieve a completely comfortable temperature environment within 10-15 degrees Celsius below zero, at a temperature in the garage minus 30-40 degrees.
The advantage of heating cables for the garage is that the power consumption of the underfloor heating is small and any wiring can withstand it.
The disadvantage of heating cables for the garage is that the competent installation of a warm floor is quite complicated. Laying a heated floor in a garage is the most difficult job compared to installing other types of heaters.
Image Gallery
Photo from
It makes sense to build a "warm floor" system in the garage if there is no viewing hole and basement in it
For a floor heating device, you can purchase a kit that includes a heating cable, a control system and metal mounting strips
The heating cable is simpler and easier to fix on the reinforcing mesh, which is used to strengthen future concrete screed
The pace of laying an electric floor heating will increase significantly if mats with an electric cable are used in the building
For the device of the electric floor with the use of mats, they simply roll out on a flat surface
Mats of the electric floor are connected in accordance with a serial circuit and connected to power supply in accordance with the requirements of the EMP
If the garage is divided into zones, then where transport load is not expected, it is not necessary to fill the screed, it is enough to apply tile adhesive
In the working area, tile is laid on the tile adhesive, in the area where the car is located, the screed over the mats can be simply sanded
Conditions for the installation of a "heated floor" in the garage
Assembly of cable underfloor heating
Fastening the cable to the reinforcing mesh
Mats for cable system
Laying strips of electric floor
Installation of a heating floor system
Tile adhesive
Laying tiles on top of an electric floor
Rules for the operation of different types of heaters
Electric heating devices are safer in their application than gas or using liquid fuel.
When operating electric heaters of any type in the garage, in addition to the basic rules for working with electrical appliances, you must pay attention to the following:
- correspondence of the possibilities of sockets and the electric network, connected to the garage, to withstand the power of the heater;
- increased humidity of the garage during the transition from negative to positive temperatures.
When operating gas, diesel and gasoline types of heaters, you must pay attention to the following:
- the possibility of gas leakage or evaporation of gasoline;
- the need to take increased fire safety measures due to the presence of open fire;
- the probability of poisoning by combustion products;
- the possibility of oxygen deficiency in the garage.
Focusing on saving money on heating the garage, diesel or gasoline options should be preferred. If safety is the basis of choice, it is advisable to prefer electrical appliances.
Non-observance of safety measures during the operation of heating devices is one of the main causes of fires in garages
Calculation of the heat output of the heater
There is a formula for calculating the required power to maintain a constant temperature in the room:
N = V x dT x K,
Where:
- N - power (kcal / h);
- V - volume of the room (cubic m);
- dT - temperature difference indoors and outdoors;
- K - empirical coefficient of dispersion (dispersion) of heat.
The coefficient K takes values:
- 0,6 – 0,9 - with high thermal insulation;
- 1,0 – 1,9 - with average thermal insulation (concrete garages with insulated doors and the absence of special ventilation);
- 2,0 – 2,9 - with low thermal insulation (concrete garages with metal doors and ventilation holes);
- 3,0 – 3,9 - without thermal insulation (metal garages).
The translation formula for kcal / h and W is as follows:
1 W = 0.86 kcal / h or 1 kcal / h = 1.163 W.
Let's solve an example. Given a standard cooperative garage-shell 6 x 3 x 2 meters. Good insulation: rear, right and left - similar garages; on top of the roof 30 cm of snow; the gate is insulated with polystyrene; hoods for the winter are plugged with foam.
At a temperature of -35 degrees, it is necessary to reach a temperature in the garage of -10 degrees and keep it for three hours for a diesel car factory. We use a fan heater as a heater.
Decision:
- V = 6 x 3 x 2 = 36 cc m;
- dT = 25 degrees;
- K = 1.5;
- N = 36 x 25 x 1.5 = 1350 kcal / h = 1570 W.
This is the value at which the temperature in the garage will be kept within -10 degrees. For heating to this temperature, it is necessary to use twice as much power within an hour.
The answer to the problem: within one hour, the power should be 3 kW, for the next 3 hours, the power should be 1.5 kW.
Warming the garage reduces heat dissipation and saves on heating, as well as using less powerful heaters
Convincing landmark - prices
The price of a heater of any type of action depends on its power, functionality and manufacturer.
To compare different heaters, we take the required power from a maximum power of 2.8 kW, the presence of a rheostat for adjusting power and basic safety features that are relevant for using the device in the garage. For electrical models, a prerequisite is a voltage of 220 volts.
Oil heater Termica Comfort 1120 (China). Three levels of power adjustment (2900 W, 1500 W and 1000 W). Shutdown function during overheating and tipping over, frost protection. There is a small fan. Price 3 300 p.
Electric convector AEG WKL 3003S (China). Maximum power 3 kW. The presence of a thermostat, protection against overheating and overturning. Floor or wall installation. Price 5 700 r.
Gas convector Bartolini Calorama FB 4000 (Italy). Maximum power 4 kW. Closed combustion chamber, electric firing from batteries. Price 12 900 r.
Electric fan heater Comfort TPK-3000 (Russia). Two levels of power adjustment (3000 W and 1500 W). Ceramic heater, overheat protection. The price is 3 700 rubles.
Gas gun Ballu BHG-10 M (China). Maximum heating power 10 kW, power adjustment using a gearbox. Power consumption of the fan is 32 W. The price is 4 900 rubles.
Indirect diesel engine gun. Maximum heating power 25 kW, power consumption of the fan 290 watts. Thermostat with automatic shutdown support. The price is 28 500 rubles.
Infrared heater NeoClima Shaft-3.0 (Greece). Quartz heating element, thermostat. Wall and floor installation. The price is 3 600 rubles.
Before going to the store, you need to carefully study the issue of heating the garage, otherwise the probability of an inappropriate purchase is high
Option for equipping a garage with infrared heaters:
How to heat a garage with a thermal diesel gun:
There is no type or model of heater that is ideally suited for all cases of garage heating. Depending on the conditions, various, including combined, approaches to solving this problem can be used.
A large selection of heaters available for purchase allows you to make high-quality heating for parking the car and comfortable work in the garage in almost any environment.
Looking for a garage heater? Or is there experience in using such heating devices? Please leave comments on the article and share your impressions about the use of heaters.