Properly planned and equipped sanitation in a private house provides a comfortable life for the owners, guarantees a long life of the building. Indeed, a modern cottage is not just a construction, but a complex of interconnected systems.
Is it possible to imagine such a housing without running water and sewage? No. Therefore, a drainage project with a layout of the main components is developed first. Let's look at how the calculation work is done and the installation is carried out together.
Standard Design Elements
The general principle of creating a wastewater system is based on the acceptance, transportation, treatment of wastewater and their removal from the site or accumulation. A number of elements are used to construct the structure. And each of the links in the chain performs its function.
Sink receiver
Any hole is meant here, with the help of which the reception and redirection of drains to the right channel is organized. Examples: sinks, toilets, drainage hatches, roof funnels, grates, drains.
Such devices are made of durable waterproof materials that are chemically resistant to wastewater, such as cast iron, ceramics, sheet steel, non-ferrous metals, and special plastic.
The main task of such devices is to receive and remove fluid into the gutters.
All receivers that are used for domestic needs should be equipped with a flushing system from the water supply system - a flushing cistern or tap
Gutters and sewer pipes
They receive drains from the receivers. The function of this link is to move the contents to a well or a sewage treatment plant.
Pipes and gutters are made from different materials. Asbestos cement is suitable for domestic sewage, provided there is no risk of mechanical damage.
Plastic pipes are becoming increasingly popular in the construction of a drainage system: they are resistant to temperature extremes, easily fit together, do not oxidize
Metal and ceramics are also used. It is permissible to divert from the washbasin, sink, bathtub from un galvanized pipes. The method of laying elements is above ground and underground.
And about how to choose pipes for arranging the external sewage read in this material.
Tank for settling or cleaning
To go to the discharge stage, drains from gutters or pipes fall into the “filters”. Storage tanks are made of plastic, concrete or metal.
Plastic drives are easy to install and easy to use. They are airtight - you don’t have to worry that wastewater will fall outside this tank
If you choose plastic, lay in the scheme the creation of a special foundation pit or metal casing so that the walls of the tank do not deform under the pressure of the ground masses.
Concrete drives are suitable for arranging a drainage or storm system, but they are not as durable as PVC.
Metal reservoirs are necessarily protected by paints, enamels. Their main drawback is the weight, so installation requires assistance.
According to the principle of action, drives are divided into:
- drainage wells;
- sedimentation tanks;
- autonomous cleaning systems.
In the tanks, the liquid is cleaned, converted into a technical one and can be used for watering a personal plot and other domestic needs.
Purified Water Discharge
The choice of the final disposal site depends on the quality of the sewage treatment plant. If you equip a station with mechanical and biological treatment of wastewater on the site, the resulting liquid can be displayed on the terrain. The best solution for stand-alone circuits is a three-chamber septic tank.
Schematic representation of a three-chamber septic tank. With the aim of improved filtration, ruff or mesh filters, lime filling can be added to such a station.
The first chamber is a sedimentation tank with anaerobic bacteria, where large and heavy fractions settle. In the second tank there is a compressor that activates the vital activity of aerobic microorganisms. In the third compartment, the liquid is completely cleaned.
In total, there are three options for discharging effluents:
- river or ground - effective, but environmental pollution is possible;
- infiltrator - in it, the waste fluid is treated with soil and discharged with groundwater;
- storage device - it does not provide for disposal of water.
The general drainage system of the house is divided into internal and external. The first includes communications inside the house: from washbasins, toilets, bathtubs, fluid flows through pipes to one point. And it is already displayed in the external structure to the well.
Schematic image of an external sewer. The outdoor circuit may include drainage systems, rainwater tanks, collector wells
In addition to the household drainage system, it is also necessary to equip storm water so that atmospheric water from the roof is discharged to the surface of the earth or to the external network of drains.
Options and layouts
The scheme can be any, the main thing is that it effectively copes with the discharge of wastewater and does not lead to overflow of pipelines. A high-quality system always involves a simple, understandable construction project and minimal operational risks.
When choosing a scheme, several factors must be taken into account:
- Location of the house on the plot - The drainage system should go downhill and end close to the road.
- Landscape features - flat, lowland, slope.
- Soil type - sandy or clay (any system can be equipped with sand, but clay, including its varieties, has its own characteristics).
- The number of residents and the area of the house - This factor affects the volume of tanks, pipe diameters.
- The depth of freezing of the earth and the location of groundwater - It is important for calculating the laying depth and the need for insulation.
All these parameters together change the drainage scheme, but the general principle and the required elements are preserved.
The only thing that remains constant is that the toilet always connects to a separate riser to prevent the spread of unpleasant odors in the rooms.
Septic tank for an autonomous system
If the house is located far from the centralized sewage system, you need an autonomous drainage scheme with a septic tank or cesspool. The latter option is suitable if the house is not used for permanent residence.
The cesspool is quickly silted up, discharges all runoff immediately into the ground, which is fraught with the ingress of untreated liquid into the aquifer. And also over time, the pit requires more frequent cleaning
In most cases, it is advisable to equip a septic tank. Its format is selected depending on the characteristics of the soil on the site. The simplest construction of two wells can be assembled for sandy soils with excellent natural drainage.
The well closest to the house is deaf. The bottom is concreted or the finished bottom is acquired. The objective of this element is to dissolve large fractions of the received effluents and purify them as much as possible. The extreme well is made without a bottom, but with a drainage field.
General rule - the first acceptance well is installed at a distance of 5-8 m from the outlet point of the drains from the house, but also not far from the road, so that it is possible to conveniently use the services of a sewage pump
On a clay site, one must also take into account the volume of water that is not absorbed immediately after precipitation, but stands or moves over the terrain.
The septic tank does not settle down in a lowland, but on a flat part or hill. All wells are made closed. Sprinkling around them is done with sand.
The septic tank is equipped on a flat area, having withstood a distance of at least 5 m from the house. It is advisable to organize a hidden blind area around the entire perimeter (spot) of the location of the wells
If the site is on a slope of the road and it is planned to build a bath lower down the slope, where to place a septic tank? If you place it near the road, how to raise the contents of the sewage from the bath, which will be below the septic tank?
In this case, the optimal scheme will be with two different septic tanks for the bathhouse and the house.
The volume of a septic tank can be calculated according to building standards. Usually for a family of 4 people a second well of 3-4 m is enough3 subject to continuous use of the system. The first is done a little more in volume.
Read more about the arrangement of the septic tank on the site below.
A variant of the wrong scheme is that the sewer pipeline must be laid with a slope towards the septic tank so that the drains by gravity go into the tank. It is better to avoid counterclones in schemes, as well as the use of pumps, other devices
Land drainage
Before starting construction, it is imperative to make a vertical layout of the site. This will create and improve conditions for drainage or water drainage from the foundation. The system itself is based on an understanding of the purpose of the individual parts of the drainage.
Depending on the purpose, the drainage can be of several types:
- cutting off the flow of water into the territory;
- partially cleaning drains or surface flows;
- melt water;
- basement floor;
- individual sewage system.
A different purpose implies a different approach to technical solutions. The second point is the operating conditions. There is drainage of complex areas, which has its own characteristics.
These are clay territories in a lowland or on a slope, with a high level of groundwater (seasonal, permanent). In the latter case, if there is an underground garage in the household, a basement, it makes sense to equip a deep drainage system.
Variants of the most popular types of drainage pipes. They differ in the number of layers and their composition. Different drainage pipes are designed for different types of soils.
For sections on the slope, a system of trays perpendicular to the slope or a drainage ditch along its upper boundary is provided. In lowlands, you can dig a pond to dispose of excess water.
Design and features of laying stormwater
The design of the stormwater shower includes all the same standard elements: storm water inlets, pipes and gutters, manholes, filters or sand traps. If underground laying is meant, pipes are used.
Ground laying involves the creation of surface ditches and the installation of plastic, concrete or asbestos gutters. The second method - open - is cheaper, less laborious, easier to operate, easier to repair.
There are two types of storms: point and linear. In point storm water inlets, it is located under the gutter of an internal or external drain. Further, all structural elements are assembled into a single network.
Option to equip a roof drain. To prevent debris from entering the stormwater, the storm water inlet is equipped with a grate or a sand trap
Linear diagrams are made up of pipes laid in the ground or channels. Water is collected and moved through trays equipped with grates or sand traps throughout the chain.
The design differences of the territory, the degree of coverage affect the choice of a particular stormwater scheme. The region of construction of housing construction also matters.
The main difference between a linear storm and a point storm is the ability to collect drains not only from the roof, but also from the entire site
The type and depth of the stormwater installation is usually found out by neighbors or in construction organizations that work in a particular area.
For most regions of our state, it is enough to deepen pipes or trays up to 50 cm into the ground, in some cases up to 70 cm.
It makes no sense to go too deep when installing collectors, manholes below the freezing point. It is more profitable to place them higher by laying a layer of heat-insulating materials (geotextiles, gravel).
To work with small trays (move, level) is much easier than with deep ones. They are easier to keep clean later.
Concrete trays plus cast-iron grates - this combination is considered the “ideal pair” for reliability and durability.
It is especially relevant if a part of the storm is planned to move the car. Such trays are installed along the edge of the blind area, the entrance group. In the latter case, installation in the center is possible if the slope of the site allows.
Installation of a roof drain
Gutters are installed along the edge of the roof so that their edges are at least 3 cm lower than the plane of the roofing. This will prevent the gutter from breaking in the winter when snow masses enter the roof.
Schematic representation of mounting elements for the arrangement of roof drain. Curtain overhangs are equipped with droppers or teardrops - they serve as guides for drains
Next is the assembly and installation of drainpipes, which are displayed in the prepared trays. Connections are mounted using funnels, storm water inlets.
We also recommend reading our article on how to equip storm sewers in the area. More details - follow the link.
Stages of arranging a drainage system
After the most suitable scheme is selected, the pipe diameter and the optimal slope are calculated on each section of the chain. Next, the entire system is assembled according to plan.
Stage # 1 - pipe diameter calculation
To determine the diameters of the pipes, it is necessary to calculate the passage of wastewater that will pass through this network.
First we find out what is the norm of water consumption per day. It differs and depends on the place of residence. In a small city, an adult uses about 200 liters, and in a metropolis - about 700 liters.
Table of normative water consumption by various devices and recommended pipe diameter. To correctly calculate consumption, you need to use GOSTs and SNiPs
The diameter of the pipes is selected for a specific receiver. If this is a toilet, a large amount of waste is implied, so a pipe with a diameter of at least 85 mm is needed. Pipes with a diameter of 32 mm are usually connected to wash basins, washing machines, dishwashers.
Stage # 2 - determination of the slope for laying
Wastewater flows by gravity, so a slope is needed. With its help, the flow moves at the desired speed. The end point is the lower part of the drainage basin.
The maximum allowable slope for horizontal pipelines is 15 cm per one laid meter of pipe. But categorically it is impossible to make such a bias over the entire extent.
The degree of slope of the sewer pipeline depends on the diameter of the pipes, the material from which they are made, and the degree of filling
If the relief is favorable, the slope is natural and close to the slope of the earth's surface. If there are watersheds in the network, there is a transfer of drains from the bottom up or the total depth is more than permissible, a pumping device is needed.
Stage # 3 - pipeline installation
A pipe of the required diameter is connected to each receiver. It is permissible to lay pipes in an external way, it is less time-consuming, but not ergonomic. More often, communications are sewn into walls, for which ditches are made on surfaces.
Pipes are interconnected by special couplings, rubber rings, adhesions, gluing
According to TU, stop valves must be inserted into each branch. A thread is cut in metal pipes, a sleeve is installed in plastic.
All taps are connected in a closed circuit.Here it is necessary to provide for the impossibility of redirecting fluid flows.
Schematic of the arrangement of the internal water supply and sewer system. This internal wiring shows steam - the water supply system (a) and the sewage system (b)
After laying the internal sewage system, an external one is created: trenches and a foundation pit are excavated for cleaning. Further, the walls of the trenches are strengthened and, if necessary, insulated with textiles or a clay, concrete casing. Then pipes are placed in them.
Now you need to connect external to the external branches. Each joint is necessarily sealed and tested for strength.
At the last stage, a treatment plant is installed and drains are supplied to it, which serve as receivers of drainage from the roof, drainage installations, and pipes of the internal sewage system. It is recommended to equip special hatches in places of docking for the possibility of prompt elimination of damage.
Useful tips for arranging
If there is a need to make a pipe turn by 90 degrees, it is better to organize two branches of 45. This will reduce the sharpness of the turn and create minimal resistance in the network.
If you still get a turn of 90 degrees or more, an inspection well is installed at the junction. It smooths the rotation angle and prevents clogging.
It is impossible to organize drainage from the roof to the blind area. This will lead to waterlogging of the soil around the building and the loss of its bearing capacity.
The surface water drainage system and foundation drainage should not be combined. Their joint work is dangerous when rainwater enters the drainage and the foundation is flooded.
Do not forget to add cranes to the system that will prevent the redirection of flows in emergency situations or during repairs.
How to make a vertical layout of a flat area.
The scheme of drainage of the site from the creation of trenches and the correct excavation to laying pipes and warming them with crushed stone is shown.
Laying the fan pipe around the house to the septic tank.
Analysis of pipes for external sewage. How they differ in color, how to choose a diameter and calculate the slope, what is a compensation pipe:
The whole process of installing a surface drainage system.
When choosing a drainage scheme, it is worth giving preference to simple structures that have already established themselves as effective for a particular area. There are many solutions, but options suitable for the southern regions are absolutely not viable in the northern regions.
In the planning process, it is necessary to take into account the future maintainability of the system, the full or partial availability of elements, the possibility of changing the chain if such a need arises.
Still have questions, find bugs or want to add interesting information to our material? Please leave your comments in the box below.